NVG510 Fixer

This is a simple utility to fix some common problems with the AT&T U-Verse NVG510 modem. This is just for convenience. If you want to do it yourself for free, follow the directions at http://earlz.net/view/2013/08/03/2006/nvg510-fixer-an-android-applicationIncluded options:* Enable/Disable Telnet on port 28* Enable/Disable True Bridge Mode on ethernet port 1* Fixing the "/cgi-bin/redirect.ha" or "Potential Connection Issue" annoyance* Enable/Disable UPnP (useful for gaming to get an Open NAT type)* Enable/Disable DHCP server* Remote factory reset and reboot* Dump full configuration data from modemOfficially supported platforms:* NVG510 9.0.6h2d30* NVG510 9.0.6h2d21* NVG510 9.0.6h048* NVG589 (possibly. Confirmed broken on firmware versions greater than 9.1.0h4d38)NOTE: This utility is NOT supported by AT&T in any manner. If you have problems with your modem after using this utility, you should do a factory reset before contacting AT&T to ensure that the problem is with your modem's hardware or AT&T's lines, and not a bug caused by this application.To access the shell from telnet after using this program, you just have to connect to your modem's IP address and use port 28. The username is "admin" and the password is your modem's access code(written on the box). From there you can just use the command `!` to break to a root shell.If you encounter any problems with the application, such as not owning an NVG510 (or can't get it to work on the NVG589), you can contact me and I will give a full refund, no questions asked.Because this application is built with Xamarin, it currently does not run under the ART runtime. This only works under the Dalvik runtime right now, but support will be added as soon as possible.