Structural Engineering Calc.

Structural Engineering Calculator contains 90 calculators and converters, that can quickly and easily calculate and convert different Structural and Civil Engineering parameters. Automatic & accurate calculations and conversions with every unit and value changes.*** Available in Metric and Imperial Units ****** Available in English, Français, Español, Italiano, Deutsch & Português ***Structural Engineering Calculator contains following 58 Calculators:• Shear Capacity of Flexural Members • Critical Ratio • Effective Length Factor • Slenderness Ratio • Allowable Compressive Stress of Building Columns (Slenderness Ratio < Critical Ratio) • Allowable Compressive Stress of Building Columns (Slenderness Ratio > Critical Ratio) • Safety Factor• Maximum Load - Axially Loaded Members • Allowable Bending Stress (Compact Members) • Allowable Bending Stress (Noncompact Members) • Moment Gradient Factor • Allowable Stress - Compression Flange • Plastic Moment• Maximum Unbraced Length for Plastic Design (I-shaped Beams) • Maximum Unbraced Length for Plastic Design (Solid Rectangular Bars and Symmetrical Box Beams) • Laterally Unbraced Length - Full Plastic Bending Capacity (I Shapes and Channels) • Laterally Unbraced Length - Full Plastic Bending Capacity (Solid Rectangular Bars and Box Beams) • Laterally Unbraced Length - Full Plastic Bending Capacity (Solid Rectangular Bars bent about major axis)• Limiting Buckling Moment • Nominal Moment (Compact Beams) • Critical Elastic Moment - Compact Beams • Critical Elastic Moment - Solid Rectangular Bars and Symmetrical Box• Allowable Shear Stress • Allowable Shear Stress with Tension Field Action• Area required by the Bearing Plate (Plate Covering the Full Area of Concrete Support) • Area required by the Bearing Plate (Plate Covering less than the Full Area of Concrete Support) • Minimum Plate Thickness • Area required for a Base Plate under a Column supported by a Concrete • Plate Length • Thickness of Plate (Cantilever Bending) • Flange Thickness (H-shaped Column) • Web Thickness (H-shaped Column)• Actual Bearing Pressure under the Plate • Allowable Bearing Stress (Rollers/Rockers) • Web Depth/Thickness Ratio (Unstiffened Web) • Web Depth/Thickness Ratio (Transverse Stiffeners)• Deflection at the Top (Wall with Solid Rectangular Cross Section) • Deflection at the Top (Shear Wall with a Concentrated Load at the top) • Deflection at the Top (Fixed Wall against rotation at the top)• Combined Axial Compression (Ratio of Computed Axial Stress to Allowable Axial Stress > 0.15) • Combined Axial Compression (Ratio of Computed Axial Stress to Allowable Axial Stress <= 0.15) • Axial Stress for a Concentrated Load (Applied at a distance larger than depth of the beam from the end of the beam) • Axial Stress for a Concentrated Load (Applied close to the beam end)• Concentrated Load of Reaction (Applied at a distance from the beam end of atleast half the depth of beam) • Concentrated Load of Reaction (Applied closer than half the depth of beam) • Relative Slenderness of Web and Flange • Total Column Load (Relative Slenderness of Web and Flange < 2.3) • Total Column Load (Relative Slenderness of Web and Flange < 1.7) • Combined Cross-sectional Area of a pair of Column-Web Stiffeners • Column-Web Depth clear of Fillets • Thickness of Column Flange • Allowable Bearing Stress on Projected Area of Fasteners • Maximum Unit Stress in Steel • Maximum Stress in the Bottom Flange • Number of Shear Connectors• Total Horizontal Shear (Based on Area of Concrete Flange) • Total Horizontal Shear (Based on Area of Steel Beam) • Total Horizontal Shear (Based on Area of Longitudinal Reinforcement)Structural Engineering Calculator also contains 32 Unit Converters related to Structural and Civil Engineering.Most Comprehensive Structural Engineering Calculator