Metal Detector

****IMPORTANT: Your device must have MAGNETIC SENSOR inside to detect metals. If your device does not have magnetic sensor will not work as it should. PLEASE DON’T WRITE BAD COMMENTS, IT’S NOT OUR FAULT!****Metal Detector app uses your devices magnetic sensor to measure magnetic field values and turns your phone into a real metal detector. Data is displayed in µT (micro Testla). 1µT = 10mG (milli Gauss). The magnetic field in nature ranges from 25 to 65 µT (0.25 to 0.65 G). Any higher measurement is an indication of metal in the area. When there is metal in the area, magnetic field increases. App works best detecting ferromagnetic materials, such as iron and can’t detect non-ferromagnetic materials such as aluminum. App works best detecting metals up to 15cm away.Metal Detector app is simple to use, just open it and move it around. If the magnetic field values rise there is metal in the area. Accuracy of the app is entirely dependent on the magnetic sensor in your device and is affected by electrical equipment such as TVs, PCs… due to electromagnetic waves. If the app does not work as it should then the problem is in your magnetic sensor. Maybe your device does not have one. Or try to initialize the sensors by pointing your phone up and rotate it in a figure 8 pattern. If your device's case has magnets or contains metal elements remove the case before using the app.We were told ghost hunters use our app to use it for ghost detection :)